Push-Pull Handheld Auto-Feed Machine

Auto-feeds screws to the bit and frees both hands — reaches deep, tight holes a fixed head can't, with near-zero missed screws.

Request a Quote Download Catalog

Overview

What it is

The push-pull handheld machine (XZ-1) is the push-pull-bit version of our handheld driver, designed for products with tightly spaced or deep screw holes. Unlike down-press bits, the push-pull bit feeds forward and pulls back — entering deeper, narrower holes without alignment problems.

Screws auto-feed to the bit, so the operator's left hand is completely free. With no manual screw picking, operators work fatigue-free for long shifts, and the missed-screw rate approaches zero. The fastest-payback entry point into automated fastening for small-batch, varied production.

Typical applications

Tight-spacing assemblies Deep-hole products Irregular workpieces Large appliances Furniture & general assembly

Key Features

Engineered for the line

Push-pull bit

Reaches deep holes and tight spacing that down-press heads cannot.

Auto screw feed

Feeds screws to the bit automatically — frees the left hand, 2–3× faster than manual.

M1–M6 range

Switch screw diameters directly within range, no changeover.

Near-zero misses

No manual picking means the missed-screw rate approaches zero, even on long shifts.

Specifications

Main specifications

Reference configuration. Most parameters are tailored to your product, screw spec and takt time — tell us your application and we'll specify the exact build.

Model	XZ-1 push-pull handheld
Bit type	Push-pull bit (deep holes / tight spacing)
Screw range	M1–M6, direct switch within diameter range
Bit length	30mm standard; custom extended bits for deep holes
Air consumption	2 m³/h
Screw magazine	3,500-screw capacity
Clearance	No obstruction within 10mm of screw hole
Screw spec	Screw total length > 1.2× screw diameter
Efficiency	2–3× vs. fully manual fastening

All specifications configurable to order. Contact our engineers for a build sheet.

Send us your part. We'll prove the cycle time.

Share a photo or drawing and your screw spec — we'll reply within 24 hours with feasibility and pricing.

Request a Quote

Related Platforms

You might also consider

Cartesian